Mould Clamp - With Clamping Stud : MC 12

Save 27%

Size: MC - 12 (1pc)
Price:
Rs. 829 Rs. 1,135

Tax included Shipping calculated at checkout

Description

  • Tool Fast mould clamp is designed especially for low height applications.
  • Only such as clamping of moulds on plastic injection moulding machines & pressure die casting machines.
  • The compact front portion of the clamp enables it to penetrate into the limited clamping area o the mould & clamp it.
  • The positioning of the forged swivel washer on the required curved groove enables the operator to set the centre distance between the clamping portion.
  • The clamping bolt as per the nearest tapped hole available on the platen (where there are no T-slots).
  • No supports are required at the rear of the clamp as the rear portion rests on the platen & the front holds the mould.
  • The flanged nut is tightened on the swivel washer which takes care of the positioning of the clamp body.
  • These clamps are equally useful on pressure die casting machines, hydraulic presses & power presses where low height clamping is done.

 

SPECIFICATIONS

Model

MC-12

dø × Pitch × L

Stud M-12 × 1.75 × 100

Clamping Range B

0-35

Length of Clamp C

110

Breadth of Clamp

50

Tightening Torque Nm Max

90

Clamping Force Max

2000 Kgs

N.W (Kgs.)

0.99

You may also like

Recently viewed